MP62340DH-LF-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP62340DH-LF-Z Overview
It is packaged in the form of a Tape & Reel (TR).It's included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The lighting driver has a total of 2 outputs that are available for use.It uses a supply voltage of Not Required to operate.There are Load Discharge, Status Flag features available on the LED driving board.It contains 8 terminations.The operation is performed through the 8 pins.As far as the lighting driver is concerned, there are 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this lighting driver.It is equipped with a total of 8 pins.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.To choose from, there are 1 channels.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.Voltage input is limited to 5.5V volts.It requires 2.7V volts as the minimum input voltage.
MP62340DH-LF-Z Features
Supplied from 5V
1 channels
MP62340DH-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP62340DH-LF-Z Power Switches ICs applications.
- Portable Devices
- USB Protection
- Portable GPS
- Wireless Headsets
- Notebook PC
- Portable/Handheld Devices
- Low Voltage I/O System Power
- Gaming
- Hot-Swap Systems
- Smartphone and PDA
