MP62340DS-LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.4W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP62340DS-LF Overview
It's?packaged?in?the way?of?a?Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.Keeping the temperature at -40°C~85°C TA ensures reliable operation.It is possible to use 2 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.As far as features are concerned, the LED driving board has Load Discharge, Status Flag.A total of 8 terminations have been found in it.For operation, we use the 8 pins.The LED driving board has a total of 1 functions.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.This LED driver is equipped with a total of 8 pins.There is 130mOhm resistance on the LED driver.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.The maximum input voltage is 5.5V volts.The input voltage minimum is 2.7V volts.
MP62340DS-LF Features
Supplied from 5V
Resistance of 130mOhm
1 channels
MP62340DS-LF Applications
There are a lot of Monolithic Power Systems Inc. MP62340DS-LF Power Switches ICs applications.
- Various applications equipped with buttons
- Hard Disk Drives
- Wireless/Networking Cards
- USB Power Distribution
- USB3.1 Power Delivery
- HDD and SSD
- Smartphone and PDA
- Wireless Modem Data Cards
- Wearable Devices
- Telecom and Network Systems
