MP62340DS-LF-Z
| Parameters | |
|---|---|
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
MP62340DS-LF-Z Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package 8-SOIC (0.154, 3.90mm Width) contains it.Surface Mount is the mounting type of the LED driver.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The lighting driver is equipped with 2 outputs that can be used.To operate, it needs a supply voltage of Not Required.A lighting driver with Load Discharge, Status Flag features is available.The termination count is 8.The operation is carried out using the 8 pins.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.A supply voltage of 5V leads to high efficiency.The LED driving board is mounted in the way of Surface Mount.It is equipped with a total of 8 pins.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.You can select from 1 channels.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.Voltage input is limited to 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.
MP62340DS-LF-Z Features
Supplied from 5V
1 channels
MP62340DS-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP62340DS-LF-Z Power Switches ICs applications.
- Set-Top Boxes
- Handheld Devices
- Hard Disk Drives
- Low Voltage I/O System Power
- Portable GPS
- Mobile Communication Devices
- Portable Video Game Players
- Portable GPS Device
- Hot-Swap Systems
- PC Cards
