MP62341DH-LF-Z
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
MP62341DH-LF-Z Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has a total of 2 outputs.In order to operate, it requires a voltage supply of Not Required.It has a total of Load Discharge, Status Flag features.It contains 8 terminations.The 8 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.The supply voltage can be 5V for high efficiency.The LED driving board is mounted in the way of Surface Mount.It is equipped with a total of 8 pins.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.In order to maximize efficiency, the supply voltage should be set at 5.5V.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 2.7V volts.
MP62341DH-LF-Z Features
Supplied from 5V
1 channels
MP62341DH-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP62341DH-LF-Z Power Switches ICs applications.
- PC Card Hot Swap
- PDAs
- Wireless/Networking Cards
- Portable/Handheld Devices
- Hot Swap
- HDD, SSD
- Various applications equipped with buttons
- Hard Disk Drives
- Wearable Devices
- Portable Devices
