MP62341DS-LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.4W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP62341DS-LF Overview
It is package in Tube case.This package is included in 8-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.It is possible to use 2 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.As far as features are concerned, the LED driving board has Load Discharge, Status Flag.A total of 8 terminations can be found in it.The 8 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1A.High efficiency is possible at 5V supply voltage.8 pins are equipped with it.It has 130mOhm resistance.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.Input voltage is limited to 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.
MP62341DS-LF Features
Supplied from 5V
Resistance of 130mOhm
1 channels
MP62341DS-LF Applications
There are a lot of Monolithic Power Systems Inc. MP62341DS-LF Power Switches ICs applications.
- Portable GPS Device
- USB Power Distribution
- Hot Swaps
- Portable Devices
- PDAs
- USB3.1 Power Delivery
- Wireless Modem Data Cards
- Hard Disk Drives
- USB Protection
- Portable Video Game Players
