MP62351ES-LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.4W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP62351ES-LF Overview
As a result, it is packaged in the form of a Tube.The 8-SOIC (0.154, 3.90mm Width) package contains it.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.It is recommended to set the temperature to -20°C~85°C TA in order to ensure reliable operation.The LED driver has a total of 2 outputs.Operation is based on Not Required supply voltage.This LED driving board is equipped with Load Discharge, Status Flag features in order for it to be useful.The termination count is 8.8 pins are used for operation.The LED driver has 1 functions.In order to meet the operation criteria, the maximum output current drops to 500mA.It is possible to achieve a high level of efficiency with a supply voltage of 5V.A total of 8 pins are present on it.130mOhm resistance is present in the lighting driver.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.The total number of channels is 2.It is recommended to set the supply voltage to 5.5V for optimum efficiency.Voltage input is limited to 5.5V volts.The input voltage minimum is 2.7V volts.
MP62351ES-LF Features
Supplied from 5V
Resistance of 130mOhm
2 channels
MP62351ES-LF Applications
There are a lot of Monolithic Power Systems Inc. MP62351ES-LF Power Switches ICs applications.
- Solid-State Drives
- Wearable Devices
- Notebook and Tablet Computers
- Set-top-box
- Mobile Communication Devices
- Portable/Handheld Devices
- Portable Devices
- Set-Top Boxes
- Hard Disk Drives
- Hot Swaps
