MP62550DJ-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Supplier Device Package | TSOT-23-6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 135mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100mOhm |
| RoHS Status | ROHS3 Compliant |
MP62550DJ-LF-P Overview
It is packaged in the form of a Cut Tape (CT).There is a package for it in the SOT-23-6 Thin, TSOT-23-6 package.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts has been specified.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.Its maximum output voltage is 1.5AV.In order to meet the operation criteria, the maximum output current drops to 1.5A.It has a resistance of 135mOhm.This case has the output current set to 1.5A.The maximum operating temperature of 85°C°C allows for stable operation.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.There is a maximum supply voltage of 5.5VV that it is capable of handling.Alternatively, 2.5V volts can be used if needed.
MP62550DJ-LF-P Features
Resistance of 135mOhm
MP62550DJ-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP62550DJ-LF-P Power Switches ICs applications.
- USB Power Distribution
- Storage Drives
- USB3.1 Power Delivery
- Portable GPS Device
- Wearable Devices
- Portable Music Players
- Wireless Headsets
- Low Voltage I/O System Power
- Portable/Handheld Devices
- HDD, SSD
