MP62550DJ-LF-Z
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDSO-G6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
MP62550DJ-LF-Z Overview
It's?packaged?in?the way?of?a?Cut Tape (CT).Package SOT-23-6 Thin, TSOT-23-6 contains it.It has been mounted as Surface Mount on the LED driver.A General Purpose switch type is owned by it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.It has a total of 6 terminations.It contains 1 functions.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.Supply voltages of 5V allow for high efficiency.In this case, there is 135mOhm resistance in the LED driving board.This case has the output current set to 1.5A.The maximum supply voltage is set to 5.5V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.5V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.
MP62550DJ-LF-Z Features
Supplied from 5V
Resistance of 135mOhm
1 channels
MP62550DJ-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP62550DJ-LF-Z Power Switches ICs applications.
- Solid State Drivers
- PC Cards
- Wireless Headsets
- Portable Devices
- Portable GPS
- USB Ports/Hubs
- Hard Disk Drives
- Handheld Devices
- Storage Drives
- Portable GPS Device
