MP62551DGT-LF-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 88mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 88m Ω |
| Height Seated (Max) | 0.8mm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP62551DGT-LF-Z Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 6-WDFN Exposed Pad package.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver is equipped with 1 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.There are 6 terminations in it.In order to operate, the 6 pins are used.It has 1 functions.The maximum output current is reduced to 1.5A to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.Currently, the LED driving board has a resistance of 88mOhm ohms.This case results in a 1.5A output current.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 2.5V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.
MP62551DGT-LF-Z Features
Supplied from 5V
Resistance of 88mOhm
1 channels
MP62551DGT-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP62551DGT-LF-Z Power Switches ICs applications.
- Hot-Swap Systems
- Portable/Handheld Devices
- Storage Drives
- Portable Music Players
- Set-Top Boxes
- PDAs
- Gaming
- Notebook PC
- Hot Swap
- USB Power Distribution
