MP62551DJ-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Supplier Device Package | TSOT-23-6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 88mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100mOhm |
| RoHS Status | ROHS3 Compliant |
MP62551DJ-LF-P Overview
Cut Tape (CT) is how it's packaged.There is a package for it in the SOT-23-6 Thin, TSOT-23-6 package.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.Slew Rate Controlled, Status Flag features are available on the lighting driver.This lighting driver is capable of delivering a maximum output of 1.5A volts.As a result, the maximum output current is reduced to 1.5A in order to meet the operation requirements.Currently, the LED driving board has 88mOhm resistance.This case results in a 1.5A output current.In order to ensure stable operation, a maximum operating temperature of 85°C°C should be maintained.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.It can handle a maximum voltage of 5.5VV.Alternatively, 2.5V volts can be used if needed.
MP62551DJ-LF-P Features
Resistance of 88mOhm
MP62551DJ-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP62551DJ-LF-P Power Switches ICs applications.
- Notebook PC
- USB Power Distribution
- Solid-State Drives
- PDAs
- HDD, SSD
- Wireless Headsets
- Wireless Modem Data Cards
- Hot-Swap Systems
- Portable Devices
- Set-top-box
