MP62551DJ-LF-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 88mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDSO-G6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP62551DJ-LF-Z Overview
As a result, it is packaged in the form of a Cut Tape (CT).There is a SOT-23-6 Thin, TSOT-23-6 package that includes it.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has a total of 1 outputs.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.In total, there are 6 terminations.It has 1 functions.The maximum output current drops to 1.5A in order to meet the operation criteria.The supply voltage can be 5V for high efficiency.The LED driver has 88mOhm resistance.It is set to 1.5A in this case.The Vsup value (maximum supply voltage) is set to 5.5V.A normal operation requires that the supply voltage (Vsup) remain above 2.5V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We offer 1 channels in total.
MP62551DJ-LF-Z Features
Supplied from 5V
Resistance of 88mOhm
1 channels
MP62551DJ-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP62551DJ-LF-Z Power Switches ICs applications.
- Hot Swaps
- Portable Devices
- Portable GPS Device
- PC Cards
- Hot Swap
- Notebook PC
- Wearable Devices
- USB3.1 Power Delivery
- Notebook and Tablet Computers
- PDAs
