MP8040DN-LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 7.5V~24V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 9A |
| Operating Supply Voltage | 25V |
| Interface | PWM |
| Nominal Supply Current | 1.5mA |
| Output Configuration | Half Bridge |
| Output Current per Channel | 4.25A |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Voltage - Load | 7.5V~24V |
| Fault Protection | Current Limiting, Over Temperature, UVLO |
| Turn On Time | 70 μs |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 100m Ω |
| Turn Off Time | 70 μs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Load Type | Inductive |
| Height Seated (Max) | 1.676mm |
| Width | 3.94mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP8040DN-LF Overview
Tube is used to package H bridge.H bridge is included in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package as a cost-saving measure.Reliabilbridge drivery can be improved by increasing 7.5V~24V's supply voltage.There is a mounting of H bridge circuit in Surface Mount.Motor driver H bridge is possible for -40°C~85°C TA to operate normally at motor driver H bridges operating temperature.H bridge motor driver has many applications, including General Purpose.H gate is mounted on the PCB using Surface Mount.In addH gateion to Status Flag, H gate has the following specific characteristics.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 8 terminations are employed.Signal interfaces include 8 pins that serve as pronged contacts.H bridge circuit operates on a voltage of 12V.At a specified ambient temperature, 9A is the maximum load current that a power supply can provide.A bridge driver's 8 pins work together in order to perform its specific functions.A high degree of efficiency is achieved by maintaining the operating supply voltage at 25V.
MP8040DN-LF Features
Available in 8-SOIC (0.154, 3.90mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Number of Receivers: 25V
MP8040DN-LF Applications
There are a lot of Monolithic Power Systems Inc. MP8040DN-LF Full Bridge Drivers, Half-Bridge Drivers applications.
- Quad DC motor
- Networking Microprocessor Voltage Regulators
- High current, low profile DC-DC converters
- Optical disc drives
- DVD players
- Non-V-Core
- OA equipments
- PC peripherals
- High-Performance Gaming Motherboards
- Workstations
