MP8040DN-LF-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 7.5V~24V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Max Output Current | 9A |
| Interface | PWM |
| Output Configuration | Half Bridge |
| Output Current per Channel | 4.25A |
| Voltage - Load | 7.5V~24V |
| Current - Output / Channel | 4.25A |
| Fault Protection | Current Limiting, Over Temperature, UVLO |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 100m Ω |
| Turn Off Time | 0.07 μs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Load Type | Inductive |
| Height Seated (Max) | 1.676mm |
| Length | 4.877mm |
| Width | 3.9295mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP8040DN-LF-Z Overview
It is packaged with Tape & Reel (TR).H bridge is included in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package as a cost-saving measure.The supply voltage 7.5V~24V has the capabilbridge drivery of improving reliabilbridge drivery.H bridge circuit is put into place in the way of Surface Mount.-40°C~85°C TA can work normally at motor driver H bridges operating temperature.H bridge motor driver has many applications, including General Purpose.H gate is mounted on the PCB using Surface Mount.Status Flag is also one of full bridges specific characteristics.It is possible to terminate a transmission line with a 8 termination using the H bridge which matches the characteristic impedance of the transmission line.H bridge circuit operates with the supply voltage of 12V.At a specified ambient temperature, the maximum load current that the power supply can provide is 9A.8 pins are work together to help this bridge driver play its specific functions.
MP8040DN-LF-Z Features
Available in 8-SOIC (0.154, 3.90mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
MP8040DN-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP8040DN-LF-Z Full Bridge Drivers, Half-Bridge Drivers applications.
- CD players
- Optical disc drives
- High current, low profile DC-DC converters
- Audio-visual equipment
- Voltage Regulators for CPUs
- Telecom Microprocessor
- Dual DC motor
- Quad DC motor
- DC-DC Converters
- High-Current DC-DC Point-of-Load Converters
