MPC17529EV
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Applications | Battery Powered |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Voltage - Supply | 2.7V~5.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MPC17529 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 5.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 700mA |
| Voltage - Load | 2V~6.8V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.2mm |
| RoHS Status | ROHS3 Compliant |
MPC17529EV Overview
The design contains a Tubepackage.A 20-SSOP (0.209, 5.30mm Width)case is included with the part.In most cases, it is recommended to mount the part at Surface Mount.As a result, it is appropriate for the component connected to Battery Powered.There is a capability for the device to provide 2.7V~5.6V volts.This device operates at a temperature range of -20°C~150°C TJ.A motor of this type can be categorized as Brushed DC.There are 20 terminations available in the part.At a rate of [0], voltage can be applied to the load.Please take in mind that this amplifier should be run at 5V.The output current should remain at 700mA.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.Using the MPC17529part number, it is located.
MPC17529EV Features
Applications : Battery Powered
Load voltage across the chip 2V~6.8V
base on MPC17529 number
MPC17529EV Applications
There are a lot of NXP USA Inc. MPC17529EV motor drivers applications.
- Large outdoor LED display
- Horticultural lighting
- Tail lights
- RGB and monochromatic LED drivers for signage and traffic signals
- Matrix LED dimmers
- Industrial high-bay lights
- Horticultural applications
- Automotive exterior and interior lighting
- Step-up or step-down driver topologies
- PWM generators
