MPC17531ATEJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Applications | Battery Powered |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G20 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 8.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 700mA |
| Voltage - Load | 2V~8.6V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 1.1mm |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MPC17531ATEJ Overview
The package contains [0].Drivers controllers comes in a 20-TSSOP (0.173, 4.40mm Width) Exposed Pad case.In general, it is recommended that the part be mounted by Surface Mount.The component connected in Battery Poweredmatches it perfectly.2.7V~3.6V volts can be supplied by the device.In terms of operating temperature, it falls within the range -20°C~150°C TJ.There is a motor type Brushed DCassociated with this motor type.In this part, there are 20 terminations available.You can apply voltage at 2V~8.6Vto the load.This amplifier should be operated at 5V.The output current should remain at 700mA.In this device, the analog IC STEPPER MOTOR CONTROLLERis employed.
MPC17531ATEJ Features
Applications : Battery Powered
Load voltage across the chip 2V~8.6V
MPC17531ATEJ Applications
There are a lot of NXP USA Inc. MPC17531ATEJ motor drivers applications.
- Dome
- Dash
- RGB and monochromatic LED drivers for signage and traffic signals
- Side marker lights
- High power LED street light
- Hazardous application
- PDAs
- Arena lighting
- Turn signals
- Hidden coves in high-end residential settings
