banner_page

MPC17550EV

5.3mm mm Motor Drivers 36 3V V 12.6mm mm


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-MPC17550EV
  • Package: 36-SSOP (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 640
  • Description: 5.3mm mm Motor Drivers 36 3V V 12.6mm mm (Kg)

Details

Tags

Parameters
RoHS Status ROHS3 Compliant
Mounting Type Surface Mount
Package / Case 36-SSOP (0.209, 5.30mm Width)
Surface Mount YES
Operating Temperature -10°C~150°C TJ
Packaging Tube
Published 2005
Part Status Obsolete
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 36
Applications Battery Powered
Technology Power MOSFET
Voltage - Supply 2.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 3V
Terminal Pitch 0.65mm
Base Part Number MPC17550
JESD-30 Code R-PDSO-G36
Function Driver - Fully Integrated, Control and Power Stage
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 2.5V
Interface Parallel
Analog IC - Other Type STEPPER MOTOR CONTROLLER
Output Configuration Half Bridge (8)
Current - Output 700mA
Supply Current-Max (Isup) 25mA
Voltage - Load 1.6V~5.5V
Motor Type - AC, DC Brushed DC
Motor Type - Stepper Bipolar
Height Seated (Max) 2.1mm
Length 12.6mm
Width 5.3mm

MPC17550EV Overview


The package contains [0].The part is packaged in a 36-SSOP (0.209, 5.30mm Width) case.A mounting position of Surface Mountis recommended for the part.As a result, it is appropriate for the component connected to Battery Powered.The device can supply 2.5V~5.5V volts.Operation temperature ranges from -10°C~150°C TJ.Drivers controllers is possible to classify the motor type as Brushed DC.There are 36 terminations available in the part.Voltage can be applied at a rate of 1.6V~5.5V volts to the load.I would like to remind you that this amplifier should be operated at 3V.Keep the part output current at 700mA.A STEPPER MOTOR CONTROLLERanalog integrated circuit is employed in this device.As a result of the MPC17550part number, it can be found.

MPC17550EV Features


Applications : Battery Powered
Load voltage across the chip 1.6V~5.5V
base on MPC17550 number

MPC17550EV Applications


There are a lot of NXP USA Inc. MPC17550EV motor drivers applications.

  • Street lights
  • Charge pump circuits
  • Home lighting systems
  • drivers for outdoor application
  • Dash
  • Commercial office
  • Large format LED backlighting
  • General lighting
  • CHMSL (center high-mount stop lamps)
  • Camera-enabled smartphones

Write a review

Note: HTML is not translated!
    Bad           Good