MPC506AU
| Parameters | |
|---|---|
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 50pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 250ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Drain to Source Resistance | 1.5kOhm |
| Normal Position | NO |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±5V~22V |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 730.794007mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Max Power Dissipation | 2W |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MPC506 |
| Pin Count | 28 |
| Operating Supply Voltage | 18V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Power Dissipation | 2W |
| Turn On Delay Time | 200 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 20mA |
MPC506AU Overview
This electronic part is conveniently packaged in 28-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 16:1. Temperatures around -40°C~85°C TA are extended for operation. In total, 28 terminations have occurred. Due to its 16 channels, the electrical component produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. It is injected into the electrical part body with 28 pins. There are 1 circuits in this multiplexer. Try searching with MPC506 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 1.5kOhm. For details about the functions of 28 pins, please refer to the datasheets. The analog switch ic is of the Dual supply type and is cost-effective. For this multiplexer to operate, 700μA current would be sufficient. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. It is recommended that you attach at least 5V to your dual power supply. It can operate from 18V operating voltages. A Drain to Source resistance of 1.5kOhm is shown for this electronic part.
MPC506AU Features
16 Channels
700μA Supply Current
Drain-to-Source resistance: 1.5kOhm
MPC506AU Applications
There are a lot of Texas Instruments MPC506AU Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- SDH/SONET multiplexers
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Fault Tolerant Systems
- Industrial control systems
- Signal routing between systems
- Intelligent PBX
- Audio and video switching
- Battery-powered systems
- PDH Multiplexers
