MPC506AU/1K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 730.794007mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| Resistance | 1.5kOhm |
| Max Power Dissipation | 7.5mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MPC506 |
| Pin Count | 28 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 2W |
| Turn On Delay Time | 200 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 50pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 250ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Normal Position | NO |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±5V~22V |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MPC506AU/1K Overview
Presented in 28-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. 16:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. Total terminations are 28. A electrical component with 1 channels is capable of high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A key feature of the 28 series is the inclusion of this electronic part as part of its design. Circuits number 1 make up this analogue multiplexer. MPC506 can be used to search for analog multiplexer variants. It has an internal resistance of 1.5kOhm. You can find the functions of the 28 pins in the datasheets. The analog switch ic is of the Dual supply type and is cost-effective. The switch device would be able to operate with 700μA current. Despite this switch device's dual supply capability, its voltage should not exceed 22V. It is recommended that you attach at least 5V to your dual power supply. A voltage of 18V can be used to operate the electronic component. It is possible to operate 16 inputs.
MPC506AU/1K Features
1 Channels
700μA Supply Current
MPC506AU/1K Applications
There are a lot of Texas Instruments MPC506AU/1K Analog Switches & Multiplexers ICs applications.
- Video switching
- Precision test equipment
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Industrial control systems
- RGB switches
- Cell phones
- 65 V DACs
- Microprocessor controlled systems
- Ultrasound
- Battery Powered Instruments
