MPC506AUG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 730.794007mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 7.5mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MPC506 |
| Output | COMMON OUTPUT |
| Pin Count | 28 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Power Dissipation | 2W |
| Turn On Delay Time | 200 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 50pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 250ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Normal Position | NO |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±5V~22V |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MPC506AUG4 Overview
Packed in 28-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 16:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. In total, there are 28 terminations. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. 28 pins are injected to the electronic part body. It consists of 1 circuits. Using the MPC506 search parameter, you can discover variants of the switch. Analog switches have 1.5kOhm internal resistance. To find out what the functions of 28 pins are, please refer to their datasheets. Dual supply type digital switch with a low cost. It would be sufficient to run this analogue multiplexer with 700μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. You should attach at least 5V voltage if you are using dual power supply. As far as the outputs go, this switch multiplexer utilizes COMMON OUTPUT of them. Operating voltages of 18V are compatible with the electrical part. In order to operate the 16 inputs, there are several steps to follow.
MPC506AUG4 Features
1 Channels
700μA Supply Current
MPC506AUG4 Applications
There are a lot of Texas Instruments MPC506AUG4 Analog Switches & Multiplexers ICs applications.
- SDH
- Fiber to the Home
- E1 Multiplexer
- Avionics test equipment
- Battery Powered Instruments
- Video switching
- Isolation
- Data switching
- Precision instrumentation
- Intelligent PBX
