MPC507AP
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Weight | 4.113913g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Max Power Dissipation | 2W |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MPC507 |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Power Dissipation | 2W |
| Turn On Delay Time | 500 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 500 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 250ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±5V~22V |
| Height | 4.07mm |
| Length | 37.4mm |
| Width | 13.53mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MPC507AP Overview
The electronic part can be shipped overseas conveniently because it is packaged in 28-DIP (0.600, 15.24mm). This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have the same number of circuits 8:1. Around -40°C~85°C TA is the extended operating temperature. In total, there have been 28 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. As part of its design, the 28 series is equipped with this electronic component. The circuits in this analogue multiplexer number 2. Try searching for MPC507 variants of the analog switch ic. The internal resistance of this digital multiplexer is 1.5kOhm. For details about the functions of 28 pins, please refer to the datasheets. The digital multiplexer has a low cost Dual supply. For this multiplexer to operate, 700μA current would be sufficient. There is no problem with using dual supply voltage, but it should not exceed 22V. It is recommended that you attach at least 5V to your dual power supply. Operating voltages of 15V are compatible with the electrical part. It is possible to operate 16 inputs.
MPC507AP Features
1 Channels
700μA Supply Current
MPC507AP Applications
There are a lot of Texas Instruments MPC507AP Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Ultrasound
- Multiplexers
- Remote wireless modules
- Intelligent PBX
- Communication systems
- USB 1.1 signal switching circuits
- Automatic test equipment
- Medical Instrumentation
- SONET
