MPC507AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 730.794007mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 7.5mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MPC507 |
| Output | COMMON OUTPUT |
| Pin Count | 28 |
| Operating Supply Voltage | 18V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 2W |
| Turn On Delay Time | 200 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 250ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±5V~22V |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MPC507AU Overview
The electrical component comes in 28-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. In total, there have been 28 terminations. Due to its 2 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. An electrical component like this is included in the 28 series. Circuits number 2 make up this analogue multiplexer. Try searching with MPC507 if you're looking for variants. As far as internal resistance is concerned, it has 1.5kOhm. To find out what the 28 pins do, please refer to the datasheets. Analog switch ics with Dual supply type are cost-effective. In order to operate this switch device, it would need a current of 700μA. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. You should attach at least 5V voltage if you are using dual power supply. The analog switch ic utilizes COMMON OUTPUT outputs in total. 18V operating voltages can be used with this electrical part. Among the inputs that can be operated are the 16 inputs.
MPC507AU Features
2 Channels
700μA Supply Current
MPC507AU Applications
There are a lot of Texas Instruments MPC507AU Analog Switches & Multiplexers ICs applications.
- ATM
- Access Concentrators
- Microprocessor Controlled Analog Systems
- Microwave transmission systems
- SDH/SONET multiplexers
- Cellular phones
- Audio and video switching
- High-Voltage
- Video signal routing
- Digital access cross connects
