MPC507AUG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 730.794007mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 7.5mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MPC507 |
| Output | COMMON OUTPUT |
| Pin Count | 28 |
| Operating Supply Voltage | 18V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Power Dissipation | 2W |
| Turn On Delay Time | 200 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Dual |
| Supply Current-Max (Isup) | 1.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 250ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±5V~22V |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MPC507AUG4 Overview
As the electronic part is packed in 28-SOIC (0.295, 7.50mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. There are 28 terminations totally. The electronic part provides high-quality output because it has 2 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. A key feature of the 28 series is the inclusion of this electronic part as part of its design. 2 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MPC507. In this multiplexer, the internal resistance is 1.5kOhm. Please refer to the datasheets for 28 pins functions. The analog switch ic is of the Dual supply type and is cost-effective. An operating current of 700μA would be sufficient for this switch device. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. You should attach at least 5V voltage if you are using dual power supply. The analog switch ic utilizes COMMON OUTPUT outputs in total. 18V operating voltages can be used with this electrical part. Among the inputs that can be operated are the 16 inputs.
MPC507AUG4 Features
2 Channels
700μA Supply Current
MPC507AUG4 Applications
There are a lot of Texas Instruments MPC507AUG4 Analog Switches & Multiplexers ICs applications.
- CSU
- FTTH
- Remote Powered Equipment
- T1/E1 Terminals
- USB 1.1 signal switching circuits
- Cable Modem
- Private Branch Exchange (PBX)
- High speed data transmission line cards
- HDTV
- Digital cross connects (DSX-1)
