MPC508AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 7.5mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MPC508 |
| Output | COMMON OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Voltage | 15V |
| Number of Circuits | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Power Dissipation | 1.28W |
| Throw Configuration | DPST |
| Turn On Delay Time | 500 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 500 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 250ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±5V~22V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MPC508AU Overview
The electrical component comes in 16-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. In total, there have been 16 terminations. A electrical component with 8 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. Electronic part bodies are injected with 16 pins. This multiplexer is composed of 1 circuits. Try searching with MPC508 to find analog multiplexer variants. As far as internal resistance is concerned, it has 1.5kOhm. You can find the functions of the 16 pins in the datasheets. An effective Dual supply digital multiplexer. It would be sufficient to run this analogue multiplexer with 700μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. With dual power supplies, you should attach at least 5V. COMMON OUTPUT outputs are utilized by this digital multiplexer. The electronic component can function from 15V.
MPC508AU Features
8 Channels
700μA Supply Current
MPC508AU Applications
There are a lot of Texas Instruments MPC508AU Analog Switches & Multiplexers ICs applications.
- DSUs
- Voice over IP/DSL – Integrated Access Devices, Smart
- Transmit
- Digital cross connects (DSX-1)
- Precision data acquisition
- Medical systems
- Channel Banks
- 65 V DACs
- Medical Instrumentation
- Avionics and Military Systems
