MPC508AU/1KG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Resistance | 1.5kOhm |
| Max Power Dissipation | 7.5mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MPC508 |
| Pin Count | 16 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Throw Configuration | DPST |
| Turn On Delay Time | 200 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 250ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Normal Position | NO |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±5V~22V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MPC508AU/1KG4 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.295, 7.50mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. The total number of terminations is 16. The electronic part delivers high-quality output through its 1 channels. A 15V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the electrical part body. 1 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with MPC508 if you are looking for variants. This digital multiplexer has 1.5kOhm internal resistance. For functions related to 16 pins, please refer to the datasheets. Analogue multiplexer with a Dual supply type that is cost-effective. The switch device would be able to operate with 700μA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. In the case of dual power supplies, you should connect at least 5V. There is a voltage range of 18V operating voltages for the electrical part.
MPC508AU/1KG4 Features
1 Channels
700μA Supply Current
MPC508AU/1KG4 Applications
There are a lot of Texas Instruments MPC508AU/1KG4 Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- Precision data acquisition
- USB 1.1 signal switching circuits
- Residential Gateways, Home Gateway/Router
- Cable Modem
- Video signal routing
- Precision test equipment
- Channelized and Unchannelized DS3 applications
- Low-Voltage
- Access Concentrators
