MPC508AUG4
| Parameters | |
|---|---|
| Supply Voltage | 15V |
| Base Part Number | MPC508 |
| Output | COMMON OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Power Dissipation | 1.28W |
| Throw Configuration | DPST |
| Turn On Delay Time | 200 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 250ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Normal Position | NO |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±5V~22V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 7.5mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
MPC508AUG4 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.295, 7.50mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. The total number of terminations is 16. The electronic part delivers high-quality output through its 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 16 series. A total of 1 circuits make up this switch device. Try searching with MPC508 to find analog multiplexer variants. There is 1.5kOhm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. A analog switch ic that has a cost-effective Dual supply type. It would be sufficient to run this analogue multiplexer with 700μA current. Despite this switch device's dual supply capability, its voltage should not exceed 22V. In the case of dual power supplies, you should connect at least 5V. A total of COMMON OUTPUT outputs are available on this analog switch ic. 18V operating voltages can be used with this electrical part. The electrical component supports 8 inputs.
MPC508AUG4 Features
1 Channels
700μA Supply Current
MPC508AUG4 Applications
There are a lot of Texas Instruments MPC508AUG4 Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- PCMCIA cards
- Routers
- Relay Replacement
- DSUs
- DSLAMs
- Sample hold systems
- SONET
- Digital cross connects (DSX-1)
- Video switching
