MPC509AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Max Power Dissipation | 7.5mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MPC509 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 18V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 1.28W |
| Throw Configuration | 4PST |
| Turn On Delay Time | 200 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 200ns, 250ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±5V~22V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MPC509AU Overview
As the electronic part is packed in 16-SOIC (0.295, 7.50mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~85°C TA is the extended operating temperature. A total of 16 terminations have been recorded. High-quality output is provided by the electronic component's 2 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. There is an electrical component included in the 16 series. These analog multiplexers are built based on SP4T switching circuits. This multiplexer is composed of 2 circuits. Search with MPC509 if you are looking for analog multiplexer variants. Analog switches have 1.5kOhm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. A cost-effective Dual supply type analogue multiplexer. It would be sufficient to run this analogue multiplexer with 700μA current. There is no problem with using dual supply voltage, but it should not exceed 22V. If you are using a dual power supply, you should attach at least 5V. The electrical part can be operated at 18V voltage levels. There are 8 inputs to be operated. There are 1 outputs on the analogue multiplexer.
MPC509AU Features
2 Channels
Switch Circuit: SP4T
700μA Supply Current
MPC509AU Applications
There are a lot of Texas Instruments MPC509AU Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Communication systems
- 65 V DACs
- Industrial control systems
- Audio and video signal routing
- Communications systems
- Audio/video switches
- High reliability control systems
- Relay Replacement
- Channel Banks
