MPC509AU/1K
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Max Power Dissipation | 7.5mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MPC509 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 18V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Power Dissipation | 1.28W |
| Throw Configuration | 4PST |
| Turn On Delay Time | 200 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 200ns, 250ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±5V~22V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
MPC509AU/1K Overview
The electrical component comes in 16-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 4:1. The operating temperature is extended to around -40°C~85°C TA. There are 16 terminations totally. This electronic part offers high-quality output due to its 2 channels. With a 15V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. Based on SP4T switching circuits, these analog multiplexers work. A total of 2 circuits make up this switch device. Try searching with MPC509 to find analog multiplexer variants. Analog switches have 1.5kOhm internal resistance. Please refer to the datasheets for 16 pins functions. Analogue multiplexers of the Dual supply type that are cost-effective. The switch device would be able to operate with 700μA current. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIt is recommended that you attach at least 5V to your dual power supply. 18V operating voltages are supported by the electronic component. Among the inputs that can be operated are the 8 inputs. The analog switch ics has 1 outputs.
MPC509AU/1K Features
2 Channels
Switch Circuit: SP4T
700μA Supply Current
MPC509AU/1K Applications
There are a lot of Texas Instruments MPC509AU/1K Analog Switches & Multiplexers ICs applications.
- Power routing
- Fiber In The Loop (FITL)
- Digital cross connects (DSX-1)
- Transmit
- Cross Connects
- Battery-powered systems
- Sample hold systems
- MP3 players
- Isolation
- High reliability control systems
