MPC509AUG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 1.28W |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MPC509 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 22V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Power Dissipation | 1.28W |
| Throw Configuration | 4PST |
| Turn On Delay Time | 200 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 200ns, 250ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±5V~22V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MPC509AUG4 Overview
Due to its 16-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 4:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 16 terminations totally. This electronic part offers high-quality output due to its 2 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. This electronic part can be found in the 16 series. Unlike digital switches, these are based on SP4T switching circuits. There are 2 circuits in this switch device. Look for analog switch ic variants by searching with MPC509. Internally, this switch multiplexer has a resistance of 1.5kOhm. Datasheets for functions of 16 pins are available. Dual supply type digital switch with a low cost. It would be sufficient to run this analogue multiplexer with 700μA current. Despite this switch's dual supply capability, its voltage should not exceed 22V. When using dual power supplies, you should attach at least 5V. The electronic component can function from 22V. The 8 inputs need to be operated in order to work. In this digital multiplexer, there are 1 outputs.
MPC509AUG4 Features
2 Channels
Switch Circuit: SP4T
700μA Supply Current
MPC509AUG4 Applications
There are a lot of Texas Instruments MPC509AUG4 Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Fault Tolerant Systems
- Microwave transmission systems
- Fiber to the Home
- Video signal routing
- Communication systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- PBX interfaces
- Wireless Local Loop
