MPC5200BV400
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 272-BBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | MPC52xx |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 272 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN LEAD |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | PC5200 |
| JESD-30 Code | S-PBGA-B272 |
| Supply Voltage-Max (Vsup) | 1.58V |
| Supply Voltage-Min (Vsup) | 1.42V |
| Speed | 400MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | PowerPC G2_LE |
| Clock Frequency | 35MHz |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 2.5V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR, SDRAM |
| USB | USB 1.1 (2) |
| Additional Interfaces | AC97, CAN, J1850, I2C, I2S, IrDA, PCI, PSC, SPI, UART |
| Height Seated (Max) | 2.65mm |
| Length | 27mm |
| RoHS Status | Non-RoHS Compliant |
MPC5200BV400 Overview
Since the microprocessor is packed in 272-BBGA, shipping overseas is convenient. High reliability is provided by the advanced packaging method Tray. The CPU has 1 Core 32-Bit cores/Bus width. The operating temperature around 0°C~70°C TA should be understood. The cpu microprocessor belongs to the MPC52xx series. Core-wise, this CPU has a PowerPC G2_LE processor. The CPU contains DDR, SDRAM RAM controllers. Featuring AC97, CAN, J1850, I2C, I2S, IrDA, PCI, PSC, SPI, UART interfaces, this microprocessor can better serve you. At 2.5V 3.3V, the CPU runs its I/O. uPs/uCs/Peripheral ICs are a MICROPROCESSOR. Use PC5200 when searching for variants of the embedded microprocessor. A total of 272 terminations have been recorded. The microprocessor should be turned on and run with a voltage supply of 1.5V volts. The supply voltage should not exceed 1.58V. Its external data bus width is 32. CPU microprocessors with a clock frequency of 35MHz are used.
MPC5200BV400 Features
PowerPC G2_LE Core
MPC5200BV400 Applications
There are a lot of NXP USA Inc. MPC5200BV400 Microprocessor applications.
- Calculators
- Volt meter
- Process control devices
- Broadband technology, video and voice processing
- Nintendo
- Television
- Aerospace navigation systems
- Fire detection & safety devices
- Information appliances (networking of household appliances)
- Magnetic resonance imaging (MRI)
