MPC8347CVRAGD
| Parameters | |
|---|---|
| Package / Case | 620-BBGA Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | MPC83xx |
| JESD-609 Code | e2 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 620 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN COPPER/TIN SILVER |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MPC8347 |
| JESD-30 Code | S-PBGA-B620 |
| Supply Voltage-Max (Vsup) | 1.26V |
| Power Supplies | 1.2V |
| Supply Voltage-Min (Vsup) | 1.14V |
| Speed | 400MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | PowerPC e300 |
| Clock Frequency | 66MHz |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 2.5V 3.3V |
| Ethernet | 10/100/1000Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, PCI, SPI |
| Height Seated (Max) | 2.46mm |
| Length | 29mm |
| RoHS Status | ROHS3 Compliant |
MPC8347CVRAGD Overview
The microprocessor is convenient for international shipping since it is packaged in 620-BBGA Exposed Pad. The packaging method Tray provides high reliability. There are 1 Core 32-Bit cores per bus width on the CPU. K-40°C~105°C TAw what the operating temperature is around -40°C~105°C TA. This is part of the MPC83xx series. PowerPC e300 processors are embedded in this CPU. A CPU with this architecture uses DDR RAM controllers. This microprocessor is equipped with an interface of DUART, I2C, PCI, SPI. There is 2.5V 3.3V I/O running on this CPU. uPs/uCs/Peripheral ICs are a MICROPROCESSOR. You can search for variants of a microprocessor with MPC8347. In total, there are 620 terminations. The microprocessor should be turned on and run with a voltage supply of 1.2V volts. There is a 32-Bit architecture in it. With a maximum supply current of 1.26V, it has a maximum power consumption. The embedded microprocessor is a typical Microprocessors. Its external data bus width is 32. In this CPU microprocessor, the clock frequency is 0 Hz. According to datasheets, the micro processor requires 1.2V power sources.
MPC8347CVRAGD Features
PowerPC e300 Core
32-Bit Structure
MPC8347CVRAGD Applications
There are a lot of NXP USA Inc. MPC8347CVRAGD Microprocessor applications.
- Volt meter
- Radio
- Measurement and control field
- Blenders
- DCS control intelligent sensor
- Microwave ovens
- Paper shredders
- Telephone sets
- Fire alarms
- Broadband technology, video and voice processing
