MPC8358EZQADDDA
| Parameters | |
|---|---|
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 668 |
| ECCN Code | 5A002 |
| Terminal Finish | Tin/Lead/Silver (Sn/Pb/Ag) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | 0°C |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Frequency | 266MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 668 |
| Operating Supply Voltage | 1.2V |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Frequency (Max) | 266MHz |
| Data Bus Width | 32b |
| Halogen Free | Halogen Free |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Number of Cores | 1 |
| Height Seated (Max) | 2.46mm |
| Length | 29mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 668 |
| Weight | 6.069208g |
MPC8358EZQADDDA Overview
The microprocessor is convenient for international shipping since it is packaged in BGA. The type MICROPROCESSOR, RISC belongs to uPs/uCs/Peripheral ICs. To date, there have been 668 terminations. When the voltage supply is 1.2V, the cpu microprocessor should be powered on and run. There is a 32-Bit architecture in it. 266MHz is the frequency of the CPU. For functions of 668 pins, please refer to the datasheets. The embedded microprocessor is a typical Microprocessors. To transfer data, there are 32b bandwidths available. The microprocessor should not operate in an environment where the temperature is higher than 105°C. Micro processor body consists of 668 pins. There are 1 cores in this CPU. This CPU is widely used in many applications because of its Surface Mount mount. Ideally, the CPU will operate at 266MHz MHz. Micro processors can be used from 1.2V. A voltage greater than 1.26V should not normally be applied to the embedded microprocessor. It is recommended to feed the CPU microprocessor with a voltage of 1.14V.
MPC8358EZQADDDA Features
32-Bit Structure
32b-Bit Data Bus Width
1-Core CPU
MPC8358EZQADDDA Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MPC8358EZQADDDA Microprocessor applications.
- Walkie talkies
- Oscilloscopes
- Air fryers
- Television
- Calculators
- Security systems
- 3D printers
- Calculator
- Smartphones-calling, video calling, texting, email
- Routers
