MPC8358VRAGDGA
| Parameters | |
|---|---|
| Series | MPC83xx |
| JESD-609 Code | e2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 668 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN COPPER/TIN SILVER |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MPC8358 |
| JESD-30 Code | S-PBGA-B668 |
| Supply Voltage-Max (Vsup) | 1.26V |
| Supply Voltage-Min (Vsup) | 1.14V |
| Speed | 400MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e300 |
| Clock Frequency | 66.67MHz |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Ethernet | 10/100/1000Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR, DDR2 |
| USB | USB 1.x (1) |
| Additional Interfaces | DUART, HDLC, I2C, PCI, SPI, UART |
| Co-Processors/DSP | Communications; QUICC Engine |
| Height Seated (Max) | 2.46mm |
| Length | 29mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Package / Case | 668-BBGA Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
MPC8358VRAGDGA Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 668-BBGA Exposed Pad. High reliability can be achieved by using the advanced packaging method Tray. This CPU has 1 Core 32-Bit cores and 1 Core 32-Bit bus widths. Identify the operating temperature around 0°C~105°C TA. The cpu microprocessor belongs to the MPC83xx series. The CPU is cored by a processor with a number of 0 cores. Memory controllers for this CPU are DDR, DDR2. This microprocessor is equipped with an interface of DUART, HDLC, I2C, PCI, SPI, UART. 1.8V 2.5V 3.3V is the CPU's I/O address. uPs/uCs/Peripheral ICs type is MICROPROCESSOR, RISC. To find variants of the microprocessor, try searching with MPC8358. A total of 668 terminations have been recorded. Using a 1.2V voltage supply, you should be able to operate the cpu microprocessor. 32-Bit is its architecture. The supply voltage should not exceed 1.26V. With a width of 32, this CPU has a wide external data bus. CPU microprocessors with a clock frequency of 66.67MHz are used.
MPC8358VRAGDGA Features
PowerPC e300 Core
32-Bit Structure
MPC8358VRAGDGA Applications
There are a lot of NXP USA Inc. MPC8358VRAGDGA Microprocessor applications.
- DCS control intelligent sensor
- Copiers
- Virtual reality VR robots
- Industrial instrumentation devices
- Sonography (Ultrasound imaging)
- Fabric
- Set-top boxes
- Fire alarms
- Dialysis machines (performs function of liver)
- Toys
