banner_page

MPC8360CVVAGDG

1mm PowerPC e300 1.8/2.53.3V 32-bit Microprocessor MPC83xx Series MPC8360 1.2V 740-LBGA


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-MPC8360CVVAGDG
  • Package: 740-LBGA
  • Datasheet: PDF
  • Stock: 697
  • Description: 1mm PowerPC e300 1.8/2.53.3V 32-bit Microprocessor MPC83xx Series MPC8360 1.2V 740-LBGA (Kg)

Details

Tags

Parameters
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Supply Voltage 1.2V
Terminal Pitch 1mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MPC8360
JESD-30 Code S-PBGA-B740
Supply Voltage-Max (Vsup) 1.26V
Power Supplies 1.8/2.53.3V
Supply Voltage-Min (Vsup) 1.14V
Speed 400MHz
uPs/uCs/Peripheral ICs Type MICROPROCESSOR, RISC
Core Processor PowerPC e300
Clock Frequency 66.67MHz
Bit Size 32
Address Bus Width 32
Boundary Scan YES
Low Power Mode YES
External Data Bus Width 32
Format FLOATING POINT
Integrated Cache YES
Voltage - I/O 1.8V 2.5V 3.3V
Ethernet 10/100/1000Mbps (1)
Number of Cores/Bus Width 1 Core 32-Bit
Graphics Acceleration No
RAM Controllers DDR, DDR2
USB USB 1.x (1)
Additional Interfaces DUART, HDLC, I2C, PCI, SPI, UART
Co-Processors/DSP Communications; QUICC Engine
Height Seated (Max) 1.69mm
Length 37.5mm
RoHS Status ROHS3 Compliant
Package / Case 740-LBGA
Surface Mount YES
Operating Temperature -40°C~105°C TA
Packaging Tray
Published 2006
Series MPC83xx
JESD-609 Code e2
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 740
ECCN Code 3A991.A.2
Terminal Finish TIN COPPER/TIN SILVER
HTS Code 8542.31.00.01
Subcategory Microprocessors
Technology CMOS
Terminal Position BOTTOM

MPC8360CVVAGDG Overview


The microprocessor is convenient for international shipping since it is packaged in 740-LBGA. High reliability is achieved with advanced packaging method Tray. Cores/Bus width of the CPU is 1 Core 32-Bit . Obtain a basic understanding of operating temperature around 0°C. The MPC83xx series contains it. The CPU is cored with a PowerPC e300 processor. This CPU uses DDR, DDR2 RAM controllers. This microprocessor is equipped with an interface of DUART, HDLC, I2C, PCI, SPI, UART. 1.8V 2.5V 3.3V is the I/O speed of this CPU. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. If you are looking for variants of the cpu microprocessor, try search with MPC8360. The total number of terminations is 740. Using a 1.2V voltage supply, the microprocessor should turn on and run. In terms of architecture, it is a 32-Bit system. The maximum supply current of this microprocessor is 1.26V. Microprocessors is a typical embedded microprocessor. Its external data bus width is 32. CPU microprocessors with clock frequencies of 66.67MHz operate. Datasheets specify that the embedded microprocessor requires 1.8/2.53.3V power supplies.

MPC8360CVVAGDG Features


PowerPC e300 Core
32-Bit Structure

MPC8360CVVAGDG Applications


There are a lot of NXP USA Inc. MPC8360CVVAGDG Microprocessor applications.

  • Teletext terminals
  • Hearing aids
  • Television
  • Printers
  • Digital cameras
  • Network communication, mobile communication field
  • Smart instruments
  • DCS control intelligent sensor
  • Instrument control
  • Home appliances

Write a review

Note: HTML is not translated!
    Bad           Good