MPC8360ZUAGDG
| Parameters | |
|---|---|
| Package / Case | 740-LBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~105°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | MPC83xx |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 740 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MPC8360 |
| JESD-30 Code | S-PBGA-B740 |
| Supply Voltage-Max (Vsup) | 1.26V |
| Supply Voltage-Min (Vsup) | 1.14V |
| Speed | 400MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e300 |
| Clock Frequency | 66.67MHz |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Ethernet | 10/100/1000Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR, DDR2 |
| USB | USB 1.x (1) |
| Additional Interfaces | DUART, HDLC, I2C, PCI, SPI, UART |
| Co-Processors/DSP | Communications; QUICC Engine |
| Height Seated (Max) | 1.69mm |
| Length | 37.5mm |
| RoHS Status | Non-RoHS Compliant |
MPC8360ZUAGDG Overview
Due to its 740-LBGA packaging, it is convenient to ship overseas. High reliability can be achieved by using the advanced packaging method Tray. Cores/Bus width of the CPU is 1 Core 32-Bit . It is important to understand the operating temperature around 0°C~105°C TA. In the MPC83xx series, it is found. This CPU is cored with a PowerPC e300 processor. There are DDR, DDR2 RAM controllers on this CPU. With its DUART, HDLC, I2C, PCI, SPI, UART interfaces, this microprocessor will be able to serve you better. This CPU runs I/O at 1.8V 2.5V 3.3V. This is a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Search MPC8360 for variants of the embedded microprocessor. In total, there are 740 terminations. When the voltage supply is 1.2V, the cpu microprocessor should be powered on and run. It is an architecture with 32 bits. The maximum supply current is 1.26V. With a 32 external data bus width, this CPU has a wide data bus. CPU microprocessors with clock frequencies of 66.67MHz operate.
MPC8360ZUAGDG Features
PowerPC e300 Core
32-Bit Structure
MPC8360ZUAGDG Applications
There are a lot of NXP USA Inc. MPC8360ZUAGDG Microprocessor applications.
- Office automation equipment and computer peripherals
- Robots
- Medical instruments chromatographs
- DCS control intelligent sensor
- Computer/laptop
- Keyboards
- Kindle
- Industrial instrumentation devices
- Dryers
- Toasters
