MPC850SRCVR50BU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 256-BBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~95°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | MPC8xx |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MPC850 |
| JESD-30 Code | S-PBGA-B256 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Speed | 50MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 1.x (1) |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA-ATA, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM |
| Height Seated (Max) | 2.54mm |
| Length | 23mm |
| RoHS Status | ROHS3 Compliant |
MPC850SRCVR50BU Overview
The microprocessor is conveniently packaged in 256-BBGA, making it easy to ship internationally. High reliability is provided by the advanced packaging method Tray. There are 1 Core 32-Bit cores/bus width on the CPU. Extended operating temperature around -40°C~95°C TA. This is part of the MPC8xx series. The CPU contains DRAM RAM controllers. With its HDLC/SDLC, I2C, IrDA, PCMCIA-ATA, TDM, UART/USART interfaces, this microprocessor will be able to serve you better. As far as I/O is concerned, this CPU runs at 3.3V. uPs/uCs/Peripheral ICs are a MICROPROCESSOR, RISC. The microprocessor can be searched for with MPC850 if you are looking for variants. In total, there are 256 terminations. Using a 3.3V voltage supply, the microprocessor should turn on and run. A 32-Bit architecture is used. The supply voltage should not exceed 3.6V. This microprocessor is a typical Microprocessors. An external data bus width of 32 is available on this CPU. According to its datasheet, this micro processor requires 3.3V power supplies.
MPC850SRCVR50BU Features
32-Bit Structure
MPC850SRCVR50BU Applications
There are a lot of NXP USA Inc. MPC850SRCVR50BU Microprocessor applications.
- Scanners
- Mobile computers
- X-ray
- Instrument control
- DDC control
- Office automation equipment and computer peripherals
- Virtual reality VR robots
- Fabric
- Smart highways (navigation, traffic control, information monitoring and car service)
- Network communication, mobile communication field
