MPC852TCVR50A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 256-BBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TA |
| Packaging | Tray |
| Published | 1999 |
| Series | MPC8xx |
| JESD-609 Code | e1 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other uPs/uCs/Peripheral ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC852 |
| JESD-30 Code | S-PBGA-B256 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 50MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Clock Frequency | 66MHz |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| Additional Interfaces | HDLC/SDLC, PCMCIA, SPI, UART |
| Co-Processors/DSP | Communications; CPM |
| Height Seated (Max) | 2.54mm |
| Length | 23mm |
| RoHS Status | ROHS3 Compliant |
MPC852TCVR50A Overview
The microprocessor is convenient for international shipping since it is packaged in 256-BBGA. Advanced packaging method Tray is used to provide high reliability. 1 Core 32-Bit cores/Bus width are present in the CPU. Understand the operating temperature around -40°C~100°C TA. This is a member of the MPC8xx series. There are DRAM RAM controllers used by this CPU. This microprocessor is equipped with an interface of HDLC/SDLC, PCMCIA, SPI, UART. The CPU runs I/O at 3.3V. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. Use MPC852 to search for variants of the cpu microprocessor. To date, there have been 256 terminations. In the case of a 1.8V voltage supply, the embedded microprocessor should be turned on and run. It is an architecture with 32 bits. The supply voltage should not exceed 1.9V. This microprocessor is a typical Other uPs/uCs/Peripheral ICs. With a 32 external data bus width, this CPU has a wide data bus. There is 66MHz clock frequency for the microprocessor. It is specified in the datasheet that this micro processor requires 1.83.3V power supplies.
MPC852TCVR50A Features
32-Bit Structure
MPC852TCVR50A Applications
There are a lot of NXP USA Inc. MPC852TCVR50A Microprocessor applications.
- Home appliances
- Smart highways (navigation, traffic control, information monitoring and car service)
- ECG machine
- Accu-check
- Magnetic resonance imaging (MRI)
- Consumer electronics products
- Heater/Fan
- Leakage current tester
- DCS control intelligent sensor
- Fire detection & safety devices
