MPC8567VTAUJJ
| Parameters | |
|---|---|
| Package / Case | 1023-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~105°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | MPC85xx |
| JESD-609 Code | e2 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 5A992 |
| Terminal Finish | TIN COPPER/TIN SILVER |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MPC8567 |
| JESD-30 Code | S-PBGA-B1023 |
| Supply Voltage-Max (Vsup) | 1.155V |
| Power Supplies | 1.11.8/2.52.5/3.3V |
| Supply Voltage-Min (Vsup) | 1.045V |
| Speed | 1.333GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500v2 |
| Clock Frequency | 166MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Ethernet | 10/100/1000Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR, DDR2, SDRAM |
| Additional Interfaces | DUART, HSSI, I2C, PCI, RapidIO, UART |
| Co-Processors/DSP | Communications; QUICC Engine |
| Height Seated (Max) | 2.75mm |
| Length | 33mm |
| RoHS Status | ROHS3 Compliant |
MPC8567VTAUJJ Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 1023-BBGA, FCBGA. A high level of reliability is provided by using an advanced packaging method Tray. There are 1 Core 32-Bit cores per bus width on the CPU. Understand the operating temperature around 0°C~105°C TA. From the MPC85xx series. The CPU is cored with a PowerPC e500v2 processor. Memory controllers for this CPU are DDR, DDR2, SDRAM. Microprocessors with DUART, HSSI, I2C, PCI, RapidIO, UART interfaces are designed to serve users better. As far as I/O is concerned, this CPU runs at 1.8V 2.5V 3.3V. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. If you are looking for variants of the cpu microprocessor, try search with MPC8567. Turning on and running the embedded microprocessor with a 1.1V voltage supply should be possible. There are 32 bits in its architecture. With a maximum supply current of 1.155V, it has a maximum power consumption. This microprocessor is a typical Microprocessors. There is a clock frequency of 166MHz on the microprocessor. The datasheet specifies that this CPU microprocessor requires 1.11.8/2.52.5/3.3V power supply.
MPC8567VTAUJJ Features
PowerPC e500v2 Core
32-Bit Structure
MPC8567VTAUJJ Applications
There are a lot of NXP USA Inc. MPC8567VTAUJJ Microprocessor applications.
- Oscilloscopes
- Medical instruments
- Temperature sensing and controlling devices
- Industrial robot
- Air fryers
- Fax machines
- Process control devices
- Routers
- Calculator
- Volt meter
