MPC8569ECVJANKGB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 783-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | MPC85xx |
| JESD-609 Code | e1 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 783 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PBGA-B783 |
| Supply Voltage-Max (Vsup) | 1.03V |
| Power Supplies | 12.5/3.3V |
| Supply Voltage-Min (Vsup) | 0.97V |
| Speed | 800MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500v2 |
| Clock Frequency | 133MHz |
| Bit Size | 32 |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.0V 1.5V 1.8V 2.5V 3.3V |
| Ethernet | 10/100Mbps (8), 1Gbps (4) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR2, DDR3, SDRAM |
| USB | USB 2.0 (1) |
| Additional Interfaces | DUART, HSSI, I2C, MMC/SD, PCI, RapidIO, SPI, TDM, UART |
| Co-Processors/DSP | Communications; QUICC Engine, Security; SEC |
| Security Features | Cryptography, Random Number Generator |
| Height Seated (Max) | 3.94mm |
| Length | 29mm |
| RoHS Status | ROHS3 Compliant |
MPC8569ECVJANKGB Overview
The microprocessor is convenient for international shipping since it is packaged in 783-BBGA, FCBGA. High reliability is achieved by using advanced packaging methods Tray. In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width. Be aware of the operating temperature around -40°C~105°C TA. This is a member of the MPC85xx series. A PowerPC e500v2 processor is present in this CPU. There are DDR2, DDR3, SDRAM RAM controllers used by this CPU. Microprocessors with DUART, HSSI, I2C, MMC/SD, PCI, RapidIO, SPI, TDM, UART interfaces are designed to serve users better. In this CPU, I/O is set to 1.0V 1.5V 1.8V 2.5V 3.3V. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Overall, there are 783 terminations. With a 1V voltage supply, the part should be turned on and run. It is an architecture with 32 bits. With a maximum supply current of 1.03V, it has a maximum power consumption. Microprocessors is a typical embedded microprocessor. With a 64 width external data bus, this CPU has a wide external data bus. CPU microprocessor clock frequency is 133MHz. According to datasheets, the micro processor requires 12.5/3.3V power sources.
MPC8569ECVJANKGB Features
PowerPC e500v2 Core
32-Bit Structure
MPC8569ECVJANKGB Applications
There are a lot of NXP USA Inc. MPC8569ECVJANKGB Microprocessor applications.
- Temperature sensing and controlling devices
- Copiers
- Accu-check
- Consumer electronics products
- Gas monitoring systems
- Safety field
- Security systems
- Oil and gas
- Projectors
- Computed Tomography (CT scan)
