MPC860DPZQ50D4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 357-BBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MPC8xx |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 357 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC860 |
| JESD-30 Code | S-PBGA-B357 |
| Supply Voltage-Max (Vsup) | 3.465V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3.135V |
| Speed | 50MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Clock Frequency | 50MHz |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (2), 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM |
| Height Seated (Max) | 2.52mm |
| Length | 25mm |
| RoHS Status | Non-RoHS Compliant |
MPC860DPZQ50D4 Overview
Since the microprocessor is packed in 357-BBGA, shipping overseas is convenient. High reliability is achieved using advanced packaging method Tray. Cores/Bus width of the CPU is 1 Core 32-Bit . Understand how the operating temperature around 0°C~95°C TA is determined. It comes from the MPC8xx series. This CPU uses DRAM RAM controllers. This microprocessor is equipped with an interface of HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART. 3.3V is the I/O speed of this CPU. There is MICROPROCESSOR, RISC MICROPROCESSOR, RISC in the uPs, uCs, or peripheral ICs categories. MPC860 is a good way to search for variants of the microprocessor. A total of 357 terminations have been recorded. Using a 3.3V voltage supply, the microprocessor should turn on and run. A 32-Bit architecture is used. A maximum supply current of 3.465V can be achieved by the microprocessor. The embedded microprocessor is a typical Microprocessors. This CPU has a wide external data Bus width of 32. The embedded microprocessor has a clock frequency of 50MHz. In the datasheet, 3.3V power supplies are required for this embedded microprocessor.
MPC860DPZQ50D4 Features
32-Bit Structure
MPC860DPZQ50D4 Applications
There are a lot of NXP USA Inc. MPC860DPZQ50D4 Microprocessor applications.
- Fabric
- DDC control
- Automatic staplers
- Home appliances
- Coffee machines
- Medical instruments
- Consumer electronics products
- Guidance-GPS
- Glucose monitoring systems (for Type 1 Diabetes)
- Removable disks
