MPC860DPZQ80D4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 357-BBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MPC8xx |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 357 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC860 |
| JESD-30 Code | S-PBGA-B357 |
| Supply Voltage-Max (Vsup) | 3.465V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3.135V |
| Speed | 80MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Clock Frequency | 50MHz |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (2), 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM |
| Height Seated (Max) | 2.52mm |
| Length | 25mm |
| RoHS Status | Non-RoHS Compliant |
MPC860DPZQ80D4 Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 357-BBGA. High reliability is provided by the advanced packaging method Tray. 1 Core 32-Bit cores/Bus width are present in the CPU. It is important to understand the operating temperature around 0°C~95°C TA. From the MPC8xx series. The CPU uses DRAM RAM controllers. Microprocessors with HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART interfaces are designed to serve users better. The CPU runs at 3.3V when it comes to I/O. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Use MPC860 when searching for variants of the embedded microprocessor. Total terminations are 357. In the case of a 3.3V voltage supply, the embedded microprocessor should be turned on and run. This microprocessor has an architecture of 32 bits. The maximum supply current of this microprocessor is 3.465V. A typical Microprocessors embedded microprocessor. There is a wide width of 32 on the external data bus of this CPU. 50MHz is the clock frequency of the embedded microprocessor. In the datasheet, 3.3V power supplies are required for this embedded microprocessor.
MPC860DPZQ80D4 Features
32-Bit Structure
MPC860DPZQ80D4 Applications
There are a lot of NXP USA Inc. MPC860DPZQ80D4 Microprocessor applications.
- Switches
- Information appliances (networking of household appliances)
- Calculator
- Graphic terminals
- Wastewater treatment
- 3D printers
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Sonography (Ultrasound imaging)
- Auto-breaking system
- Xbox
