MPC860DTCVR66D4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 357-BBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~95°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | MPC8xx |
| JESD-609 Code | e1 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 357 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN SILVER COPPER |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC860 |
| JESD-30 Code | S-PBGA-B357 |
| Supply Voltage-Max (Vsup) | 3.465V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3.135V |
| Speed | 66MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Clock Frequency | 50MHz |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (2), 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM |
| Height Seated (Max) | 2.52mm |
| Length | 25mm |
| RoHS Status | ROHS3 Compliant |
MPC860DTCVR66D4 Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 357-BBGA. A high level of reliability is provided by using an advanced packaging method Tray. This CPU has 1 Core 32-Bit cores and 1 Core 32-Bit bus widths. Understand the operating temperature around -40°C~95°C TA. This is a member of the MPC8xx series. This CPU uses DRAM RAM controllers. Microprocessors with HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART interfaces are designed to serve users better. As far as I/O is concerned, this CPU runs at 3.3V. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. The microprocessor can be searched for with MPC860 if you are looking for variants. A total of 357 terminations have been recorded. You should be able to turn on and run the embedded microprocessor with a voltage supply of 3.3V. An architecture based on 32 bits is used. The supply voltage should not exceed 3.465V. As a typical Microprocessors, this cpu microprocessor has Microprocessors display. Its external data bus width is 32. A clock frequency of 50MHz is used by the CPU microprocessor. According to datasheets, the micro processor requires 3.3V power sources.
MPC860DTCVR66D4 Features
32-Bit Structure
MPC860DTCVR66D4 Applications
There are a lot of NXP USA Inc. MPC860DTCVR66D4 Microprocessor applications.
- Calculator
- Safety -airbags, automatic braking system (ABS)
- Scanners
- Consumer electronics products
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Digital cameras
- Fire detection & safety devices
- Teletext terminals
- Microwave ovens
- Toys
