MPC860PVR80D4R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 357-BBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| Series | MPC8xx |
| JESD-609 Code | e1 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 357 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC860 |
| JESD-30 Code | S-PBGA-B357 |
| Supply Voltage-Max (Vsup) | 3.465V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3.135V |
| Speed | 80MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Clock Frequency | 50MHz |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (4), 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM |
| Height Seated (Max) | 2.52mm |
| Length | 25mm |
| RoHS Status | ROHS3 Compliant |
MPC860PVR80D4R2 Overview
Due to its 357-BBGA packaging, it is convenient to ship overseas. Using advanced packaging techniques Tape & Reel (TR), high reliability is ensured. This CPU has 1 Core 32-Bit cores and 1 Core 32-Bit bus widths. K0°C~95°C TAw what the operating temperature is around 0°C~95°C TA. In the MPC8xx series, it is found. There are DRAM RAM controllers on this CPU. With its HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART interfaces, this microprocessor will be able to serve you better. As far as I/O is concerned, this CPU runs at 3.3V. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. The microprocessor can be searched for with MPC860 if you are looking for variants. As a whole, there are 357 terminations. When the voltage supply is 3.3V, the cpu microprocessor should be powered on and run. 32-Bit is its architecture. There is a maximum supply current of 3.465V in this microprocessor. As a typical Microprocessors, this cpu microprocessor has Microprocessors display. With a width of 32, this CPU has a wide external data bus. There is a clock frequency of 50MHz on the microprocessor. The datasheet specifies that this CPU microprocessor requires 3.3V power supply.
MPC860PVR80D4R2 Features
32-Bit Structure
MPC860PVR80D4R2 Applications
There are a lot of NXP USA Inc. MPC860PVR80D4R2 Microprocessor applications.
- Switches
- Glucose monitoring systems (for Type 1 Diabetes)
- Robots
- Accu-check
- Graphic terminals
- Gas monitoring systems
- Smart instruments
- Industrial instrumentation devices
- Routers
- Walkie talkies
