MPC860SRCVR50D4
| Parameters | |
|---|---|
| Height Seated (Max) | 2.52mm |
| Length | 25mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Package / Case | 357-BBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~95°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MPC8xx |
| JESD-609 Code | e1 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 357 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC860 |
| JESD-30 Code | S-PBGA-B357 |
| Supply Voltage-Max (Vsup) | 3.465V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3.135V |
| Speed | 50MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Clock Frequency | 50MHz |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (4) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM |
MPC860SRCVR50D4 Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 357-BBGA. Advanced packaging method Tray is used to provide high reliability. Cores/Bus width of the CPU is 1 Core 32-Bit . Obtain a basic understanding of operating temperature around 0°C. In the series MPC8xx, it is found. A CPU with this architecture uses DRAM RAM controllers. A HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART interface has been added to this microprocessor in order to serve the user better. I/O is run at 3.3V on this CPU. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. Using MPC860 will help you find variants of the cpu microprocessor. The total number of terminations is 357. Turn on the cpu microprocessor and let it run with a 3.3V voltage supply. This microprocessor has an architecture of 32 bits. There is a maximum supply current of 3.465V in this microprocessor. The cpu microprocessor Microprocessors is typical. With a 32 width external data bus, this CPU has a wide external data bus. A clock frequency of 50MHz is used by the CPU microprocessor. Datasheets specify that the embedded microprocessor requires 3.3V power supplies.
MPC860SRCVR50D4 Features
32-Bit Structure
MPC860SRCVR50D4 Applications
There are a lot of NXP USA Inc. MPC860SRCVR50D4 Microprocessor applications.
- Ipad
- Office automation equipment and computer peripherals
- Digital cameras
- Projectors
- Radio
- Accu-check
- Robotic prosthetic limbs
- Electromechanical control
- DCS control intelligent sensor
- Air fryers
