MPC860SRCZQ66D4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 357-BBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~95°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MPC8xx |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 357 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC860 |
| JESD-30 Code | S-PBGA-B357 |
| Supply Voltage-Max (Vsup) | 3.465V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3.135V |
| Speed | 66MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Clock Frequency | 50MHz |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (4) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM |
| Height Seated (Max) | 2.52mm |
| Length | 25mm |
| RoHS Status | Non-RoHS Compliant |
MPC860SRCZQ66D4 Overview
Since the microprocessor is packed in 357-BBGA, shipping overseas is convenient. The packaging method Tray provides high reliability. CPUs have 1 Core 32-Bit cores/bus width. The operating temperature around -40°C~95°C TA should be understood. This is a member of the MPC8xx series. The CPU contains DRAM RAM controllers. Microprocessors with HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART interfaces are designed to serve users better. As far as I/O is concerned, this CPU runs at 3.3V. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. You can search for variants of a microprocessor with MPC860. The total number of terminations is 357. A 3.3V voltage supply should be used to turn on and run the cpu microprocessor. In terms of architecture, it is a 32-Bit system. The maximum supply current of this microprocessor is 3.465V. As a typical Microprocessors, this cpu microprocessor has Microprocessors display. With a 32 width external data bus, this CPU has a wide external data bus. A clock frequency of 50MHz is used by the CPU microprocessor. Datasheets specify that the embedded microprocessor requires 3.3V power supplies.
MPC860SRCZQ66D4 Features
32-Bit Structure
MPC860SRCZQ66D4 Applications
There are a lot of NXP USA Inc. MPC860SRCZQ66D4 Microprocessor applications.
- Fire detection & safety devices
- Industrial instrumentation devices
- Mobile computers
- DDC control
- Robots
- Petrochemical
- Home appliances
- Sonography (Ultrasound imaging)
- Automatic staplers
- Information appliances (networking of household appliances)
