MPC860TVR50D4R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 357-BBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| Series | MPC8xx |
| JESD-609 Code | e1 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 357 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN SILVER COPPER |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC860 |
| JESD-30 Code | S-PBGA-B357 |
| Supply Voltage-Max (Vsup) | 3.465V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3.135V |
| Speed | 50MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Clock Frequency | 50MHz |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (4), 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM |
| Height Seated (Max) | 2.52mm |
| Length | 25mm |
| RoHS Status | ROHS3 Compliant |
MPC860TVR50D4R2 Overview
The microprocessor is convenient for international shipping since it is packaged in 357-BBGA. A high level of reliability is provided by using an advanced packaging method Tape & Reel (TR). There are 1 Core 32-Bit cores/bus width on the CPU. The operating temperature around 0°C~95°C TA should be understood. This is part of the MPC8xx series. Memory controllers for this CPU are DRAM. The microprocessor features interfaces HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART for better service. In this CPU, I/O is set to 3.3V. uPs/uCs/Peripheral ICs are a MICROPROCESSOR, RISC. Try searching for variants of the cpu microprocessor with MPC860. Total terminations are 357. In the case of a 3.3V voltage supply, the embedded microprocessor should be turned on and run. There are 32 bits in its architecture. The maximum supply current is 3.465V. Microprocessors is a typical embedded microprocessor. With a 32 external data bus width, this CPU has a wide data bus. CPU microprocessor clock frequency is 50MHz. In the datasheet, 3.3V power supplies are required for this embedded microprocessor.
MPC860TVR50D4R2 Features
32-Bit Structure
MPC860TVR50D4R2 Applications
There are a lot of NXP USA Inc. MPC860TVR50D4R2 Microprocessor applications.
- Guidance-GPS
- Speed meter
- Fabric
- Dishwashers
- Automobile
- Home appliances
- Projector
- Blenders
- Volt meter
- Home video and audio
