MPC866TZP100A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 357-BBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tray |
| Published | 1999 |
| Series | MPC8xx |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 357 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC866 |
| JESD-30 Code | S-PBGA-B357 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 100MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (4), 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM |
| Height Seated (Max) | 2.52mm |
| Length | 25mm |
| RoHS Status | Non-RoHS Compliant |
MPC866TZP100A Overview
The microprocessor is convenient for international shipping since it is packaged in 357-BBGA. High reliability can be achieved by using the advanced packaging method Tray. Cores/Bus width is 1 Core 32-Bit. Understand how the operating temperature around 0°C~95°C TA is determined. In the series MPC8xx, it is found. A total of DRAM RAM controllers are used by this CPU. This microprocessor has HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART interfaces to serve you better. In this CPU, I/O is set to 3.3V. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. The microprocessor can be searched for with MPC866 if you are looking for variants. Total terminations are 357. Using a 1.8V voltage supply, the microprocessor should turn on and run. There are 32 bits in its architecture. There is a maximum supply current of 1.9V in this microprocessor. The embedded microprocessor is a typical Microprocessors. An external data bus width of 32 is available on this CPU. According to datasheets, the micro processor requires 1.83.3V power sources.
MPC866TZP100A Features
32-Bit Structure
MPC866TZP100A Applications
There are a lot of NXP USA Inc. MPC866TZP100A Microprocessor applications.
- Hearing aids
- Glucose monitoring systems (for Type 1 Diabetes)
- Christmas lights
- 3D printers
- PDAs, game consoles
- Fire alarms
- Speed meter
- DVD\DV\MP3 players
- Ipad
- X-ray
