MPC870CVR66
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 256-BBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TA |
| Packaging | Tray |
| Published | 1999 |
| Series | MPC8xx |
| JESD-609 Code | e1 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC870 |
| JESD-30 Code | S-PBGA-B256 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 66MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10/100Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 2.0 (1) |
| Additional Interfaces | I2C, PCMCIA, SPI, TDM, UART |
| Co-Processors/DSP | Communications; CPM |
| Height Seated (Max) | 2.54mm |
| Length | 23mm |
| RoHS Status | ROHS3 Compliant |
MPC870CVR66 Overview
Due to its 256-BBGA packaging, it is convenient to ship overseas. In order to provide high reliability, advanced packaging method Tray is used. In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width. Extended operating temperature around -40°C~100°C TA. The MPC8xx series contains it. There are DRAM RAM controllers used by this CPU. A I2C, PCMCIA, SPI, TDM, UART interface has been added to this microprocessor in order to serve the user better. There is 3.3V I/O running on this CPU. It is a MICROPROCESSOR, RISC in terms of uPs/uCs/Peripheral ICs. Try searching for variants of the cpu microprocessor with MPC870. As a whole, there are 256 terminations. When the voltage supply is 1.8V, the cpu microprocessor should be powered on and run. 32-Bit is its architecture. The supply voltage should not exceed 1.9V. Microprocessors is a typical embedded microprocessor. Its external data bus width is 32. According to datasheets, the micro processor requires 1.83.3V power sources.
MPC870CVR66 Features
32-Bit Structure
MPC870CVR66 Applications
There are a lot of NXP USA Inc. MPC870CVR66 Microprocessor applications.
- Digital set-top boxes
- Routers
- Automatic staplers
- Gas monitoring systems
- Speed meter
- PDAs, game consoles
- Digital TVs
- Radio
- Refrigerators
- Christmas lights
