MPC870CZT66
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 256-BBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TA |
| Packaging | Tray |
| Published | 1999 |
| Series | MPC8xx |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 5A992 |
| Terminal Finish | TIN LEAD |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC870 |
| JESD-30 Code | S-PBGA-B256 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 66MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10/100Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 2.0 (1) |
| Additional Interfaces | I2C, PCMCIA, SPI, TDM, UART |
| Co-Processors/DSP | Communications; CPM |
| Height Seated (Max) | 2.54mm |
| Length | 23mm |
| RoHS Status | Non-RoHS Compliant |
MPC870CZT66 Overview
The microprocessor is convenient for international shipping since it is packaged in 256-BBGA. High reliability is achieved using advanced packaging method Tray. Cores/Bus width is 1 Core 32-Bit. Extended operating temperature around -40°C~100°C TA. The cpu microprocessor belongs to the MPC8xx series. This CPU uses DRAM RAM controllers. This microprocessor features interfaces I2C, PCMCIA, SPI, TDM, UART. As far as I/O is concerned, this CPU runs at 3.3V. uPs/uCs/Peripheral ICs type is MICROPROCESSOR, RISC. To find variants of the microprocessor, try searching with MPC870. Total terminations are 256. Turning on and running the embedded microprocessor with a 1.8V voltage supply should be possible. An architecture based on 32 bits is used. The maximum supply current is 1.9V. Typical Microprocessors cpu microprocessor. Its external data bus width is 32. The micro processor requires 1.83.3V power supplies according to the datasheets.
MPC870CZT66 Features
32-Bit Structure
MPC870CZT66 Applications
There are a lot of NXP USA Inc. MPC870CZT66 Microprocessor applications.
- Hard drives
- Aerospace navigation systems
- Pacemakers (used to control abnormal heart rhythm)
- Process control devices
- Digital TVs
- Process control devices
- Automatic control
- X-ray
- Automatic staplers
- Heater/Fan
