MPC875CVR133
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 256-BBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TA |
| Packaging | Tray |
| Published | 1999 |
| Series | MPC8xx |
| JESD-609 Code | e1 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC875 |
| JESD-30 Code | S-PBGA-B256 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 133MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (1), 10/100Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 2.0 (1) |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM, Security; SEC |
| Security Features | Cryptography |
| Height Seated (Max) | 2.54mm |
| Length | 23mm |
| RoHS Status | ROHS3 Compliant |
MPC875CVR133 Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 256-BBGA. Using advanced packaging techniques Tray, high reliability is ensured. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. Obtain a basic understanding of operating temperature around 0°C. The MPC8xx series contains it. A CPU with this architecture uses DRAM RAM controllers. Featuring HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART interfaces, this microprocessor can better serve you. The CPU runs I/O at 3.3V. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. The microprocessor can be searched for with MPC875 if you are looking for variants. In total, there are 256 terminations. Turning on and running the embedded microprocessor with a 1.8V voltage supply should be possible. The architecture of the microprocessor is 32-bit. The maximum supply current of this microprocessor is 1.9V. The cpu microprocessor Microprocessors is typical. The external data bus width of this CPU is 32. The micro processor requires 1.83.3V power supplies according to the datasheets.
MPC875CVR133 Features
32-Bit Structure
MPC875CVR133 Applications
There are a lot of NXP USA Inc. MPC875CVR133 Microprocessor applications.
- Leakage current tester
- Metering & measurement field
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Agriculture, transportation field
- ECG machine
- Digital set-top boxes
- Ipad
- Dryers
- Electronic jamming systems
- Copiers
