MPC875VR66
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 256-BBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tray |
| Published | 1999 |
| Series | MPC8xx |
| JESD-609 Code | e1 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC875 |
| JESD-30 Code | S-PBGA-B256 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 66MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (1), 10/100Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 2.0 (1) |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM, Security; SEC |
| Security Features | Cryptography |
| Height Seated (Max) | 2.54mm |
| Length | 23mm |
| RoHS Status | ROHS3 Compliant |
MPC875VR66 Overview
With a packing size of 256-BBGA, this embedded microprocessor is ideal for international shipping. High reliability can be achieved by using the advanced packaging method Tray. There are 1 Core 32-Bit cores/bus width on the CPU. Understand the operating temperature around 0°C~95°C TA. From the MPC8xx series. A CPU with this architecture uses DRAM RAM controllers. A HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART interface has been added to this microprocessor in order to serve the user better. There is 3.3V I/O running on this CPU. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. Try searching for variants of the cpu microprocessor with MPC875. The total number of terminations is 256. When the voltage supply is 1.8V, the cpu microprocessor should be powered on and run. In terms of architecture, it is a 32-Bit system. The maximum supply current of this microprocessor is 1.9V. A typical Microprocessors embedded microprocessor. Its external data bus width is 32. According to datasheets, the micro processor requires 1.83.3V power sources.
MPC875VR66 Features
32-Bit Structure
MPC875VR66 Applications
There are a lot of NXP USA Inc. MPC875VR66 Microprocessor applications.
- Instrument control
- Fire detection & safety devices
- Blenders
- Medical instruments chromatographs
- Heater/Fan
- DDC control
- Auto-breaking system
- Virtual reality VR robots
- Projectors
- Measuring revolving objects
